references/555.md · 24000
--> C1 C1 --> GND
TRIG_IN["Trigger"] --> P2
P3 --> OUTPUT["Output"]
P5 --> C2
C2 --> GND
P1 --> GND
style VCC fill:#f00,color:#fff
style GND fill:#000,color:#fff
style Q1 fill:#fcf,color:#000
style OUTPUT fill:#6f6
#### Figure 14. Waveforms of Linear Ramp
Trigger ─────┐ ┌───────────────────────────
(Pin 2) └─────┘
↓ Trigger pulse
Output ─────────┐ ┌───────────────
(Pin 3) └──────────────┘
|←──── td ────→|
Threshold ╱ Linear ramp (not exponential)
(Pin 6) ─────╱
0V ↗
Vcc/3 2Vcc/3
Linear ramp: Vc1 = (Ic/C1) × t
Slope S = Ic/C1
R1 = 47kΩ, R2 = 100kΩ, RE = 2.7kΩ, RL = 1kΩ, C1 = 0.01μF, Vcc = 5V
In Figure 13, current source is created by PNP transistor Q1 and resistor R1, R2, and RE.
#### Equation 6: Current Source Calculation
$$I_C = \frac{V_{CC} - V_E}{R_E} \quad (12)$$
Here, VE is:
$$V_E = V_{BE} + \frac{R_2}{R_1 + R_2} V_{CC} \quad (13)$$
For example, if Vcc=15V, RE=20kΩ, R1=5kW, R2=10kΩ, and VBE=0.7V, VE=0.7V+10V=10.7V Ic=(15-10.7)/20k=0.215mA
When the trigger starts in a timer configured as shown in Figure 13, the current flowing through capacitor C1 becomes a constant current generated by PNP transistor and resistors. Hence, the VC is a linear ramp function as shown in Figure 14. The gradient S of the linear ramp function is defined as follows:
#### Equation 7: Ramp Slope
$$S = \frac{V_{P-P}}{T} \quad (14)$$
Here the Vp-p is the peak-to-peak voltage. If the electric charge amount accumulated in the capacitor is divided by the capacitance, the VC comes out as follows:
V = Q/C (15)
The above equation divided on both sides by T gives us
#### Equation 8: Simplified Ramp Slope
$$\frac{V}{T} = \frac{Q/T}{C} \quad (16)$$
and may be simplified into the following equation.
S = I/C (17)
In other words, the gradient of the linear ramp function appearing across the capacitor can be obtained by using the constant current flowing through the capacitor. If the constant current flow through the capacitor is 0.215mA and the capacitance is 0.02μF, the gradient of the ramp function at both ends of the capacitor is S = 0.215m/0.022μ = 9.77V/ms.
# Mechanical Dimensions
## Package
### 8-DIP (Dual In-line Package)
┌─────────────────────────────────────┐
│ ● │
│ #1 #8 │
│ ┌──┐ ┌──┐ │
│ │ │ │ │ │
│ └──┘ └──┘ │
│ #2 #7 │
│ ┌──┐ 555 TIMER ┌──┐ │
│ │ │ │ │ │
│ └──┘ └──┘ │
│ #3 #6 │
│ ┌──┐ ┌──┐ │
│ │ │ │ │ │
│ └──┘ └──┘ │
│ #4 #5 │
│ ┌──┐ ┌──┐ │
│ │ │ │ │ │
│ └──┘ └──┘ │
└─────────────────────────────────────┘
**8-DIP Dimensions (in millimeters):**
| Parameter | Min | Nom | Max |
|:---|:---:|:---:|:---:|
| Package Length | - | 9.60 | - |
| Package Width | 6.20 | 6.40 | 6.60 |
| Package Height | - | 5.08 | - |
| Lead Pitch | - | 2.54 | - |
| Lead Width | 0.36 | 0.46 | 0.56 |
| Lead Thickness | - | 0.33 | - |
| Lead Length | 2.92 | 3.30 | 3.68 |
| Standoff | 0.51 | - | - |
6.40 ± 0.20
┌────────────────┐
│ │
┌────┤ ├────┐
│ │ │ │ 9.60
│ │ │ │ MAX
│ │ │ │
└────┤ ├────┘
│ │
└────────────────┘
↕ 2.54 (pin pitch)
Side View:
┌────────────────┐
5.08 │ │
MAX └──┬──┬──┬──┬──┬─┘
│ │ │ │ │ 3.30 ± 0.30
│ │ │ │ │ (lead length)
═══╧══╧══╧══╧══╧═══
↕ 0.33 MIN
### 8-SOP (Small Outline Package)
┌───────────────────────────────┐
│ ● │
│ #1 #8 │
│ ─┐ ┌─ │
│ │ │ │
├───┴───────────────────────┴───┤
│ 555 TIMER │
├───┬───────────────────────┬───┤
│ │ │ │
│ ─┘ └─ │
│ #4 #5 │
└───────────────────────────────┘
**8-SOP Dimensions (in millimeters):**
| Parameter | Min | Nom | Max |
|:---|:---:|:---:|:---:|
| Package Length | 4.72 | 4.92 | 5.12 |
| Package Width | 5.70 | 6.00 | 6.30 |
| Package Height | - | 1.55 | 1.75 |
| Lead Pitch | - | 1.27 | - |
| Lead Width | 0.31 | 0.41 | 0.51 |
| Lead Length (toe) | 0.40 | 0.80 | 1.27 |
| Standoff | 0.05 | 0.15 | 0.25 |
| Overall Width (with leads) | - | 6.00 | - |
6.00 ± 0.30
┌────────────────┐
─┐ │ │ ┌─
│ │ │ │ 4.92 ± 0.20
─┘ │ │ └─
└────────────────┘
↕ 1.27 (pin pitch)
Side View:
1.55 ± 0.20
┌────────────────┐
MAX │ │
└──┬──┬──┬──┬──┬─┘
└──┴──┴──┴──┴── 0.10~0.25 standoff
## Pin Assignment Summary
| Pin | Symbol | 8-DIP | 8-SOP | Description |
|:---:|:---:|:---:|:---:|:---|
| 1 | GND | ● | ● | Ground (0V) |
| 2 | TRIG | ● | ● | Trigger input |
| 3 | OUT | ● | ● | Output |
| 4 | RESET | ● | ● | Reset (active low) |
| 5 | CONT | ● | ● | Control voltage |
| 6 | THRES | ● | ● | Threshold input |
| 7 | DISCH | ● | ● | Discharge |
| 8 | Vcc | ● | ● | Supply voltage |