references/6C62256.md
AS6C62256 32K x 8 Low-Power CMOS SRAM Specification
1. Overview
The AS6C62256 is a 256 Kbit (32K x 8) low-power CMOS static random-access memory (SRAM) manufactured by Alliance Memory (and second-sourced by others). It is fully compatible with common 28-pin SRAM pinouts and is widely used in 6502, Z80, and other 8-bit microprocessor systems for read/write memory.
The device offers fast access times, simple control logic, and very low standby power consumption.
2. General Characteristics
| Feature | Description | | ----------------- | --------------------------------- | | Memory size | 256 Kbits (32 KB) | | Organization | 32,768 x 8 bits | | Data bus | 8-bit | | Address bus | 15-bit (A0-A14) | | Technology | CMOS SRAM | | Access time | 55 ns / 70 ns (variant dependent) | | Operating voltage | 5 V ± 10% | | Standby current | < 1 µA (typical) | | Package types | DIP-28, SOJ-28, TSOP-28 |
3. Pin Configuration (Logical)
3.1 Address Pins (A0-A14)
- Select one of 32,768 memory locations
- Address must be stable during read or write cycle
3.2 Data Pins (I/O0-I/O7)
- Bidirectional tri-state data bus
- High-impedance when not enabled
3.3 Control Pins
| Pin | Description | | --- | -------------------------- | | CE# | Chip Enable (active low) | | OE# | Output Enable (active low) | | WE# | Write Enable (active low) | | VCC | +5 V power supply | | GND | Ground |
4. Memory Organization
- Linear address space from
$0000to$7FFF - Each address corresponds to one byte (8 bits)
Address range: 0000h - 7FFFh
Data width: 8 bits
5. Read Operation
5.1 Read Cycle Conditions
| Signal | State | | ------ | ----- | | CE? | LOW | | OE? | LOW | | WE? | HIGH |
- Data becomes valid after access time (tAA)
- Outputs remain valid while CE? and OE? are LOW
- Outputs are high-impedance when CE? or OE? is HIGH
6. Write Operation
6.1 Write Cycle Conditions
| Signal | State | | ------ | ----------- | | CE? | LOW | | OE? | HIGH or LOW | | WE? | LOW pulse |
- Data is written on the rising edge of WE? or CE?
- Address and data must be stable during write window
- No internal write delay (true SRAM behavior)
7. Timing Notes (Summary)
| Parameter | Typical | | -------------------- | -------- | | Address access (tAA) | 55-70 ns | | CE? access (tACE) | 55-70 ns | | OE? access (tOE) | 25-35 ns | | Write cycle time | ≥ 55 ns |
8. Power Modes
8.1 Active Mode
- CE? = LOW
- Normal read/write operation
8.2 Standby Mode
- CE? = HIGH
- Data retained
- Very low power consumption
9. Reset and Power-Up Behavior
- No reset pin required
- Data is undefined at power-up
- Memory contents preserved only while VCC is present
10. Typical System Integration (6502 Example)
Mapped at: $0000 - $7FFF
CE? decoded address
OE? R/W?
WE? inverted R/W?
11. Absolute Maximum Ratings (Summary)
| Parameter | Rating | | ------------- | --------------------- | | VCC | -0.5 V to +6.5 V | | Input voltage | -0.5 V to VCC + 0.5 V | | Storage temp | -65 °C to +150 °C |
12. Compatible and Equivalent Devices
| Device | Notes | | --------- | --------------- | | AS6C62256 | Alliance Memory | | CY62256 | Cypress | | HM62256 | Hitachi | | KM62256 | Samsung | | IS62C256 | ISSI |
13. Common Use Cases
- Main RAM for 6502 / Z80 systems
- Video buffers and frame memory
- Embedded systems requiring fast R/W memory
- Retrocomputer SBC designs
14. References
- https://www.alliancememory.com/wp-content/uploads/AS6C62256-23-March-2016-rev1.2.pdf
- https://www.futurlec.com/Datasheet/Memory/62256.pdf
- https://www.malinov.com/sergeys-blog/homebrew-notes.html