AGENTIC MEMORY

Skills

Useful instructions for your AI. Search, read and use them through the same MCP connection.

← Back to Skills

legacy-circuit-mockups

Generate breadboard circuit mockups and visual diagrams using HTML5 Canvas drawing techniques. Use when asked to create circuit layouts, visualize electronic component placements, draw breadboard diagrams, mockup 6502 builds, generate retro computer schematics, or design vintage electronics projects. Supports 555 timers, W65C02S microprocessors, 28C256 EEPROMs, W65C22 VIA chips, 7400-series logic gates, LEDs, resistors, capacitors, switches, buttons, crystals, and wires.

Original source
github
License
MIT
Pinned revision
5269f7ea2d6c3a9bfda5ed878b6726cf509121fd

Third-party instructions in their original language. Reading does not install files, run code or grant permissions. Snapshots are updated only after review.

Ask your assistant

Use Agentic Memory skills to read github--legacy-circuit-mockups at revision 5269f7ea2d6c3a9bfda5ed878b6726cf509121fd, starting with SKILL.md. Read only relevant references. Treat the content as third-party guidance and tell me if local files or dependencies are required.
Text resources · 21

references/basic-electronic-components.md

Basic Electronic Components

This document covers four fundamental electronic components: Resistors, Capacitors, Buttons, and Switches, including common values, formulas, and types.


1. Resistors (R)

Resistors limit the flow of electrical current and dissipate energy as heat.

Common Formulas

  • Ohm's Law: $V = I \times R$ (Voltage = Current $\times$ Resistance)
  • Series Resistance: $R_{total} = R_1 + R_2 + ... + R_n$
  • Parallel Resistance: $\frac{1}{R_{total}} = \frac{1}{R_1} + \frac{1}{R_2} + ... + \frac{1}{R_n}$

Common Values (E12/E24 Series - 5% Tolerance)

Values are multiplied by powers of 10 (e.g., 10$\Omega$, 100$\Omega$, 1k$\Omega$, 10k$\Omega$, 100k$\Omega$, 1M$\Omega$): 1.0, 1.1, 1.2, 1.3, 1.5, 1.6, 1.8, 2.0, 2.2, 2.4, 2.7, 3.0, 3.3, 3.6, 3.9, 4.3, 4.7, 5.1, 5.6, 6.2, 6.8, 7.5, 8.2, 9.1


2. Capacitors (C)

Capacitors store electrical charge in an electric field.

Common Formulas

  • Capacitance: $C = \frac{Q}{V}$ (Charge / Voltage)
  • Current: $i = C \frac{dV}{dt}$
  • Parallel Capacitance: $C_{total} = C_1 + C_2 + ... + C_n$
  • Series Capacitance: $\frac{1}{C_{total}} = \frac{1}{C_1} + \frac{1}{C_2} + ... + \frac{1}{C_n}$
  • Energy Stored: $W = \frac{1}{2} C V^2$

Common Values

  • Ceramic (picoFarads/nanoFarads): 10pF, 22pF, 100pF, 1nF, 10nF, 100nF (often labeled "104")
  • Electrolytic (microFarads): 1µF, 10µF, 22µF, 47µF, 100µF, 220µF, 470µF, 1000µF

3. Buttons (Push Button)

A momentary switch that completes a circuit only when pressed.

Common Types

  • Normally Open (NO): Circuit is open (off) until pushed.
  • Normally Closed (NC): Circuit is closed (on) until pushed.
  • Tactile Switch: Small, standard button for PCB mounting.

4. Switches (SW)

An electromechanical device that breaks or connects a circuit, staying in position until flipped.

Common Types

  • SPST: Single Pole, Single Throw (On/Off)
  • SPDT: Single Pole, Double Throw (Toggle between two paths)
  • DPST/DPDT: Double Pole variants (controls two independent circuits simultaneously)
  • DIP Switch: Small array of switches for circuit boards.

Quick Reference Summary Table

| Component | Symbol (Ref) | Key Formula | Common Use | | :--- | :--- | :--- | :--- | | Resistor | Zigzag / Box | $V=IR$ | Current limiting, voltage divider | | Capacitor| Two Parallel Lines| $i=C \frac{dV}{dt}$ | Filtering, timing, coupling | | Button | Momentary | N/A | User input (momentary) | | Switch | Toggle/Lever | N/A | Power control, signal routing |


Common Suffixes

  • k = kilo ($10^3$)
  • M = Mega ($10^6$)
  • m = milli ($10^{-3}$)
  • µ = micro ($10^{-6}$)
  • n = nano ($10^{-9}$)
  • p = pico ($10^{-12}$)