AGENTIC MEMORY

Skills

Useful instructions for your AI. Search, read and use them through the same MCP connection.

← Back to Skills

cold-email

Use for any cold outreach or SDR email or follow-up sequence to prospects who did not opt in, before drafting. Scores the sequence for length, personalization and spam risk with email_sequence_analyzer.py. Opted-in nurture: email-sequence.

Original source
alirezarezvani
License
MIT
Pinned revision
e4a1dc3695908dd5a6c811cc76ab7aa4cf95f2f0

Third-party instructions in their original language. Reading does not install files, run code or grant permissions. Snapshots are updated only after review.

This skill also requires local files or dependencies. Remote reading alone may not be enough.

Ask your assistant

Use Agentic Memory skills to read alirezarezvani--cold-email at revision e4a1dc3695908dd5a6c811cc76ab7aa4cf95f2f0, starting with SKILL.md. Read only relevant references. Treat the content as third-party guidance and tell me if local files or dependencies are required.
Text resources · 4

references/deliverability-guide.md

Deliverability Guide

A cold email that lands in spam is worse than no email at all — it damages your sender reputation for future sends. Get deliverability right before you worry about copy.


The Deliverability Stack

Email deliverability is a layer cake. Every layer has to be correct:

Domain reputation      (is your domain trusted by inbox providers?)
        ↓
Authentication         (SPF, DKIM, DMARC — are you who you say you are?)
        ↓
Sending infrastructure (IP reputation, sending limits, ramp-up)
        ↓
List quality           (are you sending to real, active addresses?)
        ↓
Email content          (does the content look like spam?)
        ↓
Engagement signals     (opens, replies, not-spam clicks)

Fix problems from the bottom up. No point perfecting copy if your domain is blacklisted.


Domain Setup

Use a Dedicated Sending Domain

Never send cold email from your primary company domain (acme.com). If your cold email domain gets flagged or blacklisted, you lose your main domain's email reputation.

Setup options:

  • mail.acme.com — subdomain of main domain
  • acme-hq.com — separate domain with similar name
  • getacme.com / tryacme.com — common pattern for SaaS

Rules for the sending domain:

  • Set up a proper website (even a simple redirect to main site) — bare domains look suspicious
  • Match the company name visually — unrelated domains look like phishing
  • Get a G Suite / Microsoft 365 mailbox on it — shared hosting email servers have worse reputation

SPF Record

SPF (Sender Policy Framework) tells receiving servers which IP addresses are allowed to send email from your domain. Without it, your emails look unauthenticated.

DNS TXT record:

v=spf1 include:_spf.google.com ~all

Replace _spf.google.com with your sending provider's SPF include. Check your provider's documentation for the exact value (Google Workspace, SendGrid, Mailgun, etc. all have their own).

Important: Only have ONE SPF record per domain. If you have multiple, they conflict and authentication fails.

DKIM

DKIM (DomainKeys Identified Mail) adds a cryptographic signature to your emails, proving they weren't tampered with in transit.

Setup is done through your email provider — they give you a DNS TXT record to add. It looks like:

google._domainkey.yourdomain.com  IN  TXT  "v=DKIM1; k=rsa; p=MIGfMA0..."

The public key in that record lets receiving servers verify your email's signature.

DMARC

DMARC ties SPF and DKIM together and tells receiving servers what to do when authentication fails.

Starter DMARC record (monitoring mode):

_dmarc.yourdomain.com  IN  TXT  "v=DMARC1; p=none; rua=mailto:[email protected]"

p=none means monitor but don't block — good to start with. Once you've confirmed SPF and DKIM are working cleanly, move to p=quarantine or p=reject.

Verify Everything

Use mail-tester.com: send a test email to their address, then check your score. 9/10 or higher means your authentication is clean. Below 7/10 means something is broken.


Domain Warmup

A brand new domain has no sending reputation. Email providers don't trust it. If you start sending 200 emails/day on day one, you will be flagged.

Warmup = building reputation gradually by sending low volumes and getting positive engagement.

Warmup Schedule

| Week | Emails/Day | Focus | |------|-----------|-------| | 1 | 5-10 | Real conversations only — send to colleagues, get replies | | 2 | 20-30 | Small cold outreach batches — highly targeted, good lists | | 3 | 40-60 | Expand slightly — maintain >30% open rate | | 4 | 80-100 | Normal volume — watch bounce and spam complaint rates | | 5+ | Up to 200 | Full volume — monitor daily |

Warning signs that warmup is failing:

  • Open rate drops below 20%
  • Bounce rate above 3%
  • Spam complaint rate above 0.1%
  • Emails landing in Gmail Promotions tab

Manual warmup vs tools: Tools like Lemwarm, Warmup Inbox, or Mailreach automate warmup by sending emails to a network of inboxes that automatically open and engage. These help build reputation faster. They're worth it for new domains.


List Quality

Sending to bad email addresses destroys your sender reputation. Every hard bounce tells inbox providers your list is dirty.

Before Sending

  1. Verify email addresses — Use a verification tool (NeverBounce, ZeroBounce, Hunter's verify, etc.) before importing any list. Remove invalid, catch-all, and risky emails.

  2. Target bounce rate: Keep it below 2%. Above 5% is dangerous territory.

  3. Remove catch-all domains carefully — Catch-all domains accept any email regardless of whether the mailbox exists. Your emails won't hard-bounce, but they may go nowhere.

  4. Never buy lists — Purchased lists are old, dirty, unverified, and frequently include spam traps (addresses placed by inbox providers to catch spammers). One spam trap hit can blacklist your domain.

Ongoing Hygiene

  • Remove anyone who hasn't opened in 90 days from your sequence (move to a re-engagement campaign or suppress)
  • Remove unsubscribes immediately — required legally and good for reputation
  • Remove bounces from all future sends automatically

Content That Hurts Deliverability

Spam filters evaluate content alongside authentication and reputation. These patterns trigger filters:

Spam Trigger Words to Avoid

High-risk words and phrases (use sparingly or avoid):

  • "Free" (especially in subject lines)
  • "Guaranteed" / "100% guaranteed"
  • "No obligation"
  • "Act now" / "Limited time"
  • "Congratulations"
  • "You've been selected"
  • "Click here"
  • "Earn money" / "Make money"
  • "Risk-free"
  • "Special offer"
  • Excessive exclamation points!!!
  • ALL CAPS words

These don't automatically spam-filter you, but they're additive — the more of them in a single email, the higher the spam score.

Content Rules

| Do | Don't | |----|-------| | Plain text or minimal HTML | Heavy HTML with complex tables, images | | One link max per email | 5+ links — looks like phishing or newsletter | | Personalized subject lines | Batch-blasted "LAST CHANCE" subject lines | | Unsubscribe link | No unsubscribe mechanism | | Consistent from name | Rotating from names | | Short emails | Wall-of-text emails |

The HTML Question

Plain text emails consistently get better deliverability than HTML emails for cold outreach. They look like real emails from real people — because they are.

If you need to include your company logo and a fancy template: don't. Save that for newsletters to opted-in subscribers. Cold email = plain text, signed like a person.


Sending Limits by Platform

| Platform | Safe Daily Volume | Notes | |----------|------------------|-------| | Google Workspace (paid) | 500/day | Shared across all outgoing | | Google Workspace + Warmup | Up to 2000/day | After full warmup | | Microsoft 365 | 10,000/day | Generous, but still subject to reputation | | SendGrid | Depends on plan | IP reputation matters at scale | | Mailgun | Depends on plan | Good for transactional, OK for cold | | Lemlist / Instantly / Apollo | Platform-managed | Warmup built in, use their sending infrastructure |

For cold outreach at scale (>500/day), dedicated sending platforms are better than Google/Microsoft direct — they're designed to manage reputation across many users.


Checking Your Reputation

If you suspect deliverability problems, check these:

  1. Mail-tester.com — Authentication and content score (10/10 is perfect)
  2. MXToolbox Blacklist Check — Check if your domain or IP is on any blacklists
  3. Google Postmaster Tools — Shows your domain reputation with Gmail (spam rate, auth failures)
  4. Microsoft SNDS — Similar to Google Postmaster for Outlook/Hotmail

If you're on a blacklist:

  • Stop sending immediately from that domain
  • Identify the cause (bad list, spam complaints, warmup failure)
  • Follow the blacklist's delisting process (each has its own)
  • Consider using a new domain while the old one recovers

Legal Requirements

Cold email has legal requirements in most markets. Breaking them isn't just unethical — it's fined.

| Regulation | Where | Key Requirements | |-----------|-------|-----------------| | CAN-SPAM | USA | Honest subject line, physical address, unsubscribe mechanism | | CASL | Canada | Requires express or implied consent — much stricter than CAN-SPAM | | GDPR | EU/EEA | Legitimate interest basis required; no soft opt-in | | PECR | UK | Similar to GDPR; ICO enforcement |

Minimum compliance for most cold email:

  • Include your company name and physical address in every email
  • Provide a working unsubscribe link or reply-to-unsubscribe instruction
  • Honor unsubscribes within 10 business days (CAN-SPAM) or immediately (GDPR best practice)
  • Don't use misleading subject lines or from names

Disclaimer: This is practical guidance, not legal advice. For EU/Canada outreach, consult a lawyer who specializes in email marketing law — GDPR and CASL are stricter than most people realize.