AGENTIC MEMORY

Skills

Useful instructions for your AI. Search, read and use them through the same MCP connection.

← Back to Skills

13c-metabolic-flux

Estimates intracellular metabolic fluxes from steady-state carbon-13 isotope-tracing measurements using validated atom maps, mfapy isotope simulation, constrained multistart fitting, and flux-profile diagnostics. Use for 13C-MFA, carbon tracing, mass isotopomer distributions (MDVs/MIDs), positional isotopomers, parallel tracer experiments, and determining whether labeling data constrain a pathway flux. Distinguishes measured-label inference from COBRA flux balance analysis and flags experiments requiring nonstationary MFA.

Original source
K-Dense-AI
License
MIT
Pinned revision
5f2bc0341354fd5590aef76a533ada1e1e5b4e62

Third-party instructions in their original language. Reading does not install files, run code or grant permissions. Snapshots are updated only after review.

This skill also requires local files or dependencies. Remote reading alone may not be enough.

Ask your assistant

Use Agentic Memory skills to read k-dense-ai--13c-metabolic-flux at revision 5f2bc0341354fd5590aef76a533ada1e1e5b4e62, starting with SKILL.md. Read only relevant references. Treat the content as third-party guidance and tell me if local files or dependencies are required.
Text resources · 5

references/inference.md

Inference and interpretation

What is fitted

The adapter constructs internal carbon-pool balances S v = 0 and exact reference constraints. Linear programming checks feasibility in normalized flux units and explicitly verifies the returned vector. A null-space basis parameterizes the equalities, while linear inequalities preserve every directional flux bound. Bounds that force a reaction to a single value on a feasible face are promoted to equalities using a tolerance relative to each reaction's own feasible values. Thus a flux profile endpoint can correctly have fewer free dimensions. Optimizer constraints also use normalized units; an unrelated loose bound does not define this tolerance.

mfapy evaluates the steady-state isotope model using elementary metabolite units. The pinned mfapy generator drops EMU rows with absolute turnover <= 0.001. The adapter uniformly rescales positive directional fluxes so the smallest is 1 for forward simulation only. Steady-state isotope distributions are invariant under this rescaling; reported fluxes and measured-rate residuals retain their original units. This avoids unit-dependent disappearance of slowly turning-over pools. Exact zero-throughput pools can still be undefined and are not repaired by rescaling. The fitting code does not use mfapy's built-in optimizer, confidence intervals, or natural-abundance correction. It uses SciPy SLSQP with multiple feasible starts, constructed from convex combinations of linear-programming vertices. This is a local optimization strategy; no global optimum is guaranteed. Seeds control starting-point generation, not bit-identical behavior across numerical libraries or machines.

For each normalized distribution, omit one bin and minimize

RSS = sum_b (prediction_b - mean_b)^T covariance_b^-1 (prediction_b - mean_b)
      + sum_k ((predicted_flux_k - measured_flux_k) / SEM_k)^2

The implementation uses a Cholesky solve rather than explicitly inverting covariance. With a consistent full compositional covariance, changing the omitted bin leaves this quadratic form invariant. A diagonal SEM approximation does not have that property. Covariance validation checks row/column sums relative to each row/column's magnitude and positive semidefiniteness after variance scaling, so large-variance bins cannot hide invalid rare-bin uncertainty. MDV normalization error must be negligible relative to the declared measurement error as well as small in absolute terms.

Read the JSON results

  • fluxes: one best converged feasible point, including arbitrary coordinates along unresolved directions. Preserve the declared flux_unit and exact reference.
  • rss, predictions: weighted residual sum and observed/predicted distributions. A low residual can reflect an uninformative experiment or an overflexible model.
  • optimizer_starts: success, residual, iterations, and termination message for every start. Failed numerical evaluations are penalized during optimization; a result is accepted only if its final simulation is finite, constraints hold, and the optimizer reports convergence. No converged solution makes the command fail with exit code 2.
  • free_flux_dimensions: affine feasible flux dimension, not parameter count guessed from a reaction list. independent_measurements counts retained bins and rates.
  • local_sensitivity_rank: numerical rank of the whitened residual Jacobian in normalized feasible coordinates. Finite differences use step 1e-5 and a singular- value cutoff max(1e-4, largest singular value * 1e-6). This is a local diagnostic, not a proof of structural identifiability. Poor scaling, bounds, near-zero pools, and strongly nonlinear behavior can affect it. A null value means feasible perturbations could not be evaluated.
  • weak_flux_directions: relative reaction changes along locally insensitive directions, normalized to maximum absolute component 1. These are local directions, not permissible finite flux changes without another feasibility check.
  • active_bounds: estimated reactions at imposed bounds, excluding declared fixed reactions. Inspect why the bound is active before making a biological claim.
  • goodness_of_fit: approximate chi-square tail probability only when local rank is full, residual degrees of freedom are positive, and no nonfixed bound is active. Known Gaussian covariance, an adequate observation model, interior parameters, and asymptotic regularity are assumptions. Estimated SEMs, low counts, inequality boundaries, or nonlinearity can invalidate this approximation. A high p-value is not evidence that a biological mechanism is true.

Flux profiles

Every requested reaction is fixed at each grid value across its feasible range; all nuisance fluxes are refitted. The grid includes the best fitted reaction value. Acceptance uses RSS(profile) - RSS(best) <= chi-square(confidence, 1). This is an asymptotic likelihood-ratio approximation for the declared Gaussian observation model, not a universal MFA confidence formula. Profiles of parameter combinations or exact finite-sample coverage require a different analysis.

| Status | Meaning and next action | | --- | --- | | threshold_crossings_bracketed | Grid points bracket threshold crossings. Report the brackets; increase resolution and repeat starts if precise limits matter. Inspect all crossings because disconnected accepted regions are possible. | | bound_limited | At least one feasible-range edge remains accepted. Report that edge as constraint-limited, not measurement-determined. | | unresolved_within_bounds | All sampled points across the feasible range remain accepted. Do not report the arbitrary optimum as an identified pathway rate. This finite grid is not a global structural proof. | | incomplete_profile | At least one point failed. Missing points are unknown. Improve starts, numerical conditioning, or model specification before interpreting limits. | | baseline_not_optimal_refit_required | A profile found a materially smaller RSS. Refit the baseline before using any confidence claim. | | fixed_by_constraints | The reaction is fixed by exact constraints; it has no data-estimated profile interval. |

Even a flat reaction can acquire an apparent bound through coupling to a different bounded reaction. In the TCA demonstration, increasing v7 also increases v6, and v6 has an imposed upper bound. This can create an upper profile edge even though the isotope measurements do not determine exchange. Record such bound sensitivity.

Troubleshooting by evidence

Excellent fit, weak rank or broad profiles: examine tracer position and measured carbon subsets, symmetric pools, reversible exchange, absolute flux scale, compartments, and dilution. Simulate candidate measurements at distinct feasible fluxes along the weak direction. Do not add more measurements of an invariant whole-molecule MDV.

Large structured residuals: examine atom maps, input-label purity, missing carbon sources, fragment assignments, isotope correction, compartment mixing, and steady-state assumptions before increasing error bars or adding free reactions.

Negative corrected fractions or singular covariance: revisit the upstream peak and correction model. Clipping and renormalization change both the mean and its error structure. The CLI intentionally rejects such inputs rather than silently changing them.

Different answers across starts: compare RSS, feasibility and profiles. Increase starts and repeat seeds. Report competing optima when both explain the data.

Singular forward model: look for zero-throughput/unfed pools or mappings outside the supported representation. An isotopic steady-state distribution may be undefined. Do not impose positive flux solely to conceal an inactive pool.

Evidence and applicability

The bundled cyclic-network calculation reproduces a published EMU numerical reference. The branch experiment has an independently calculable optimum and likelihood profile. The TCA measurement asset uses those simulated reference probabilities and a declared synthetic covariance; it is not an experimental dataset. Tests also verify isotope limits, repeated-substrate condensation, reversed-label conventions, compositional likelihood invariance, and non-identifiability. Larger organism models, unusual symmetry, or new measurement types require independent validation before scientific use.

Reviewed engine contract

Checked against the official mfapy source at a10433af16682386548b360297e2476152d46ede on 2026-09-30. The adapter relies on these forward-simulation contracts:

  • MetabolicModel(reactions, reversible, metabolites, target_fragments) accepts the mapped dictionaries. The adapter supplies no aggregate reversible constraints and uses type="intermediate" carbon subsets, not multi-intermediate GC-MS fragments.
  • generate_carbon_source_template() returns a carbon-source object initialized as unlabeled. The adapter explicitly replaces every source distribution with set_all_isotopomers(name, values, correction="no") and checks its boolean result. The source implementation confirms that carbon 1 is the least-significant bit.
  • generate_mdv(state, carbon_sources) without timepoint evaluates steady state and returns MdvData; get_fragment_mdv(fragment) returns bins in increasing mass order. No natural-abundance addition is enabled by this adapter.

The current SciPy SLSQP and HiGHS linear-programming contracts retain the bound/linear-constraint and feasibility options used here. The numerical suite and documented synthetic examples were rerun with Python 3.12, NumPy 2.5.3, SciPy 1.18.1, NLopt 2.11.0, and the pinned mfapy commit. This validates the bundled adapter's supported scope, not every upstream mfapy feature.