AGENTIC MEMORY

Skills

Useful instructions for your AI. Search, read and use them through the same MCP connection.

← Back to Skills

legacy-circuit-mockups

Generate breadboard circuit mockups and visual diagrams using HTML5 Canvas drawing techniques. Use when asked to create circuit layouts, visualize electronic component placements, draw breadboard diagrams, mockup 6502 builds, generate retro computer schematics, or design vintage electronics projects. Supports 555 timers, W65C02S microprocessors, 28C256 EEPROMs, W65C22 VIA chips, 7400-series logic gates, LEDs, resistors, capacitors, switches, buttons, crystals, and wires.

Original source
github
License
MIT
Pinned revision
5269f7ea2d6c3a9bfda5ed878b6726cf509121fd

Third-party instructions in their original language. Reading does not install files, run code or grant permissions. Snapshots are updated only after review.

Ask your assistant

Use Agentic Memory skills to read github--legacy-circuit-mockups at revision 5269f7ea2d6c3a9bfda5ed878b6726cf509121fd, starting with SKILL.md. Read only relevant references. Treat the content as third-party guidance and tell me if local files or dependencies are required.
Text resources · 21

references/lcd.md

DFRobot FIT0127 LCD Character Display Specification

1. Overview

The DFRobot FIT0127 is a family of HD44780-compatible character LCD modules commonly used in embedded systems and hobbyist projects. These displays provide alphanumeric output using a dot-matrix character generator and support both 8-bit and 4-bit parallel interfaces.

FIT0127 modules are frequently paired with microcontrollers and 8-bit CPUs such as the 6502, AVR, PIC, and Arduino platforms.


2. General Characteristics

| Feature | Description | | ----------------- | --------------------------------------------------- | | Display type | Character LCD (STN, Yellow-Green backlight typical) | | Controller | HD44780 or compatible | | Interface | Parallel (4-bit or 8-bit) | | Character size | 5 x 8 dot matrix | | Operating voltage | 5 V logic (some variants support 3.3 V) | | Backlight | LED (separate power pins) | | Viewing mode | Transflective |


3. Display Variants

The FIT0127 designation is commonly associated with 16x2 character LCD modules.

| Variant | Characters | | ------- | ------------------- | | FIT0127 | 16 columns x 2 rows |


4. Pin Configuration

4.1 Pinout (Standard 16-pin Header)

| Pin | Name | Description | | --: | ---- | --------------------- | | 1 | VSS | Ground | | 2 | VDD | +5 V supply | | 3 | VO | Contrast adjust | | 4 | RS | Register Select | | 5 | R/W | Read/Write select | | 6 | E | Enable | | 7 | D0 | Data bit 0 | | 8 | D1 | Data bit 1 | | 9 | D2 | Data bit 2 | | 10 | D3 | Data bit 3 | | 11 | D4 | Data bit 4 | | 12 | D5 | Data bit 5 | | 13 | D6 | Data bit 6 | | 14 | D7 | Data bit 7 | | 15 | A | Backlight Anode (+) | | 16 | K | Backlight Cathode (-) |


5. Electrical Characteristics (Typical)

| Parameter | Value | | ------------------- | ----------- | | Logic voltage (VDD) | 4.5 - 5.5 V | | Logic current | ~1-2 mA | | Backlight voltage | ~4.2 V | | Backlight current | 15-30 mA |


6. Interface Signals

6.1 RS (Register Select)

| RS | Function | | -- | -------------------- | | 0 | Instruction register | | 1 | Data register |

6.2 R/W

| R/W | Operation | | --- | ------------- | | 0 | Write to LCD | | 1 | Read from LCD |

6.3 Enable (E)

  • Data is latched on the falling edge of E
  • E must be pulsed HIGH  LOW for each transfer

7. Data Bus Operation

7.1 8-bit Mode

  • Uses D0-D7
  • Faster operation

7.2 4-bit Mode

  • Uses D4-D7 only
  • Data transferred in two nibbles (high first)
  • Saves I/O pins

8. Internal Memory Map

8.1 DDRAM (Display Data RAM)

| Address | Display Position | | --------: | ---------------- | | 0x00-0x0F | Line 1, Col 1-16 | | 0x40-0x4F | Line 2, Col 1-16 |

8.2 CGRAM (Character Generator RAM)

  • Supports up to 8 custom characters
  • Each character uses 8 bytes

9. Instruction Set (Summary)

| Instruction | Description | | ----------- | ---------------------- | | 0x01 | Clear display | | 0x02 | Return home | | 0x04-0x07 | Entry mode set | | 0x08-0x0F | Display on/off control | | 0x10-0x1F | Cursor/display shift | | 0x20-0x3F | Function set | | 0x40-0x7F | Set CGRAM address | | 0x80-0xFF | Set DDRAM address |


10. Initialization Sequence (4-bit Mode)

Wait >15 ms after VDD rises
Function set: 0x33
Function set: 0x32
Function set: 0x28 (4-bit, 2-line)
Display ON/OFF: 0x0C
Entry mode: 0x06
Clear display: 0x01

11. Timing Characteristics (Typical)

| Operation | Time | | ------------------ | -------- | | Enable pulse width | ≥ 450 ns | | Command execution | ~37 µs | | Clear / Home | ~1.52 ms |


12. Typical System Integration (6502 Example)

RS   VIA output
E    VIA output
D4-D7  VIA Port B
R/W  Grounded (write-only)

13. Contrast and Backlight Control

  • Contrast adjusted via potentiometer on VO pin
  • Backlight may require series resistor
  • PWM dimming supported via external control

14. Absolute Maximum Ratings (Summary)

| Parameter | Rating | | -------------- | --------------------- | | VDD | -0.3 V to +6.0 V | | Input voltage | -0.3 V to VDD + 0.3 V | | Operating temp | -20 °C to +70 °C |


15. Common Use Cases

  • Status displays
  • Debug output for SBCs
  • User interfaces for embedded systems
  • Retrocomputer front panels

16. References