AGENTIC MEMORY

Skills

Useful instructions for your AI. Search, read and use them through the same MCP connection.

← Back to Skills

legacy-circuit-mockups

Generate breadboard circuit mockups and visual diagrams using HTML5 Canvas drawing techniques. Use when asked to create circuit layouts, visualize electronic component placements, draw breadboard diagrams, mockup 6502 builds, generate retro computer schematics, or design vintage electronics projects. Supports 555 timers, W65C02S microprocessors, 28C256 EEPROMs, W65C22 VIA chips, 7400-series logic gates, LEDs, resistors, capacitors, switches, buttons, crystals, and wires.

Original source
github
License
MIT
Pinned revision
5269f7ea2d6c3a9bfda5ed878b6726cf509121fd

Third-party instructions in their original language. Reading does not install files, run code or grant permissions. Snapshots are updated only after review.

Ask your assistant

Use Agentic Memory skills to read github--legacy-circuit-mockups at revision 5269f7ea2d6c3a9bfda5ed878b6726cf509121fd, starting with SKILL.md. Read only relevant references. Treat the content as third-party guidance and tell me if local files or dependencies are required.
Text resources · 21

references/t48eeprom-programmer.md

T48 Universal EEPROM / Flash Programmer Specification

1. Overview

The T48 Universal Programmer (also sold as TL866-3G / TL866II Plus successor) is a USB-connected device used to read, program, and verify a wide range of EEPROM, Flash, EPROM, GAL, and microcontroller devices. It is commonly used in retrocomputing, firmware development, and electronics repair workflows.

The T48 is a modern replacement for the TL866 series, offering expanded device support and improved software compatibility.


2. General Characteristics

| Feature | Description | | ------------------- | ---------------------------------- | | Programmer type | Universal device programmer | | Interface | USB 2.0 | | Socket | ZIF-48 | | Supported devices | EEPROM, Flash, EPROM, GAL, MCU | | Programming voltage | Generated internally | | Host OS | Windows, Linux (open-source tools) | | Verification | Read-after-write, checksum |


3. Physical Description

3.1 ZIF Socket

  • 48-pin Zero Insertion Force (ZIF) socket
  • Supports DIP packages directly
  • PLCC, SOP, TSOP supported via adapters

3.2 Indicators and Controls

| Item | Description | | ------------- | --------------------------- | | Status LED | Power / activity indication | | ZIF lever | Locks IC into socket | | USB connector | Host connection and power |


4. Supported Device Categories

4.1 Memory Devices

  • 27xxx EPROM
  • 28xxx EEPROM (e.g., AT28C256)
  • 29xxx Flash memory
  • Serial EEPROMs (with adapters)

4.2 Programmable Logic

  • GAL16V8, GAL22V10 (read/write/verify)

4.3 Microcontrollers (Limited)

  • Some PIC, AVR, and 8051-family devices
  • Programming support depends on voltage and pinout

5. Electrical Capabilities

| Parameter | Description | | -------------- | ---------------------------------------- | | VCC range | 1.8 V - 6.5 V (device dependent) | | VPP | Internally generated, device-specific | | I/O protection | Over-current and short-circuit protected |


6. Programming Operations

6.1 Common Operations

  • Device identification
  • Blank check
  • Read
  • Program (write)
  • Verify
  • Erase (Flash/EPROM)

6.2 Verification Modes

  • Byte-by-byte comparison
  • Checksum / CRC validation

7. Software Support

7.1 Official Software

  • Windows-based GUI
  • Device database with pin mappings
  • Automatic voltage and timing control

7.2 Open-Source Tools

| Tool | Notes | | --------- | -------------------------------- | | minipro | Linux / macOS / Windows CLI tool | | libusb | USB communication backend |

Example:

minipro -p AT28C256 -w rom.bin

8. Device Insertion and Pin Mapping

  • Device orientation indicated by pin 1 marker
  • Many devices use lower-left alignment in ZIF socket
  • Software displays correct insertion diagram

9. Typical Workflow (EEPROM Example)

  1. Select device type (e.g., AT28C256)
  2. Insert chip into ZIF socket
  3. Perform blank check
  4. Load binary image
  5. Program device
  6. Verify written contents

10. Power and Safety Notes

  • Programmer powered entirely via USB
  • Do not insert or remove ICs while programming
  • Use adapters for non-DIP packages

11. Limitations

  • Not all microcontrollers are supported
  • High-voltage EPROMs may require specific adapters
  • Not intended for in-circuit programming (ISP)

12. Common Use Cases

  • Programming EEPROMs for 6502 SBCs
  • Flashing ROM images for retro systems
  • Reading and backing up legacy EPROMs
  • GAL logic development

13. Comparison with TL866II Plus

| Feature | TL866II Plus | T48 | | ----------------- | ------------ | --------------- | | Device support | Good | Expanded | | OS support | Windows | Windows / Linux | | Open-source tools | Limited | Excellent |


14. References